delete

ADJUSTING THE NOZZLES OF THE WINDSHILED WASHERS 

If you are having a car, you would literally understand the importance of every parts of it. No matter it is small or big, then you can have the idea to fix it or bring it to the mechanic to be fixed immediately. Example to this is the nozzle part of the washer of your windshield. It will help to clean easily the wet art of your front windshield. It is one of the most important parts of the car as when it is raining heavily it can wipe out the water that blocks your sight from driving the road. It helps to clean as well when the windshield of the car gets dirty every time. If there is a problem with the nozzles and the way it works. There could be two solution to this. One is that you are going to fix it by your own or you call someone or a mechanic that can fix it before it gets worst. Second is to replace this one with a new one. The windshield replacement Portland could be a bit expensive but the assurance that it will work conveniently is guaranteed. If you don’t have much money then you can follow the guideline below in order to make adjust your nozzles well and be able to perform its job to your car. You can do this every time that it won’t work or function well.  

WINDSHILED WASHERS

In this manner of fixing or adjusting your nozzle you would be needing a piece of needle and of course you may ask your friend or one member of your family to help you in assisting the thing that you will doing.  

The very first step that you need to do is to let the spray to work and try to observe it carefully especially how it functions. If it is working well then you don’t need to do anything about it. But if you keep on waiting for the fluid or the water to comes out and nothing happened. Then, there is really a problem with your nozzle’s windshield washer.  

Ask your friend or someone to be inside of the car and turn on the spray for the water. Try to observe deeply the position. You may look carefully where it goes and what is happening every time that it is being sprayed. You may start to move it and adjust a bit or little by little. You have to make sure that you know where the nozzle is located. Then after looking for it. You may now see two holes there and that is where the water comes out. Try to put the needle to the holes gently. Don’t exert to much force in putting inside the needle. Then, you may use the needle to guide where do you want to put the or to spray the water. You can do this for several times until it works.  

If it doesn’t work after doing it many times. Then, you might need some professional help to fix this.